Aircraft and aviation detailing — Xentra Auto

Aircraft & Aviation Detailing

Dry wash, brightwork and cabin work on your ramp at 47 fields from Teterboro to Montauk — and an AOG turnaround when the aircraft has to go out clean today.

★★★★★ 4.9 · 47 Airports Covered · Cleaning Only — No Maintenance · Mobile · 7 Days

Cleaning and appearance work, not maintenance

We detail aircraft: exterior dry wash, brightwork, belly and de-ice residue, cabin interiors, leather, carpet, galley and lavatory. That is appearance and cleanliness work, and it is what we are set up to do well.

We do not perform maintenance, inspections or any airworthiness work. Under 14 CFR Part 43 that may only be done by a certificated A&P mechanic or a Part 145 repair station, and we are neither. If something on your aircraft needs a mechanic, your FBO or MRO is the right call and we will say so rather than take the booking.

What we do offer urgently is turnaround cleaning. An aircraft that has to carry passengers in a few hours, a cabin that needs resetting between legs, a bird strike or a fuel spill that has to come off the paint before the next departure — that is the call we take at short notice.

What aircraft detailing covers

Everything below is done on your ramp or in your hangar, with our own water, power and containment.

✈️

Exterior dry wash

Waterless or low-moisture wash on painted and polished surfaces, which is what most ramps and hangars allow. No runoff to contain, no water into panel gaps or static ports, and safe on composite and on polished aluminium.

✨

Brightwork and polished alloy

Leading edges, spinners, nacelles and unpainted skin brought back and then sealed. Oxidation on polished aluminium returns fast once it starts, so the sealing stage is the part that decides how long it holds.

🪑

Cabin interiors

Leather and fabric seating, headliners, sidewalls, veneer, tray tables and carpet. Hot-water extraction on carpet, conditioner on hide, and no silicone dressings anywhere a passenger will put a hand.

🧽

Galley and lavatory

Sanitised properly, including the surfaces that get missed between legs. On a charter aircraft this is the single thing passengers notice and comment on.

🛩️

Belly and de-ice residue

Exhaust soot, hydraulic film and spent de-ice fluid off the underside and the empennage. Left on, that residue holds moisture against the skin through a whole winter.

🛡️

Paint sealing and ceramic

A sealed finish means the next wash takes less time and bugs and de-ice fluid release instead of bonding. On a frequently flown aircraft that compounds quickly.

Aircraft we detail

Seven groups, 94 types, and a different process for each — a doped fabric Cub and a Global 7500 have almost nothing in common except that both get ruined by the wrong product. If yours is not named, it almost certainly falls into one of these groups; send the type and we will tell you which.

Piston singles and light twins

Paint on a trainer or a tie-down single is usually chalked and oxidised rather than dirty, so another wash achieves nothing. The work that changes how it looks is a decontamination wash, a correction pass and a sealant. Bug strike on the leading edges and exhaust soot along the belly come off first, by hand.

Cessna 152Cessna 172 SkyhawkCessna 182 SkylanePiper ArcherPiper WarriorPiper CherokeePiper ArrowCirrus SR20Cirrus SR22Diamond DA40Diamond DA62Beechcraft BonanzaBeechcraft BaronMooney M20Piper SenecaPiper AztecPiper NavajoGrumman TigerVan's RV series

Turboprops

Exhaust staining aft of the stacks and prop-blast grit at the wing root are the signature on a turboprop, and both need more than detergent. Prop blades and de-ice boots get their own products — boot dressing is not a tyre dressing, whatever the label says.

Beechcraft King Air C90King Air 250King Air 350Pilatus PC-12Daher TBM 850TBM 910TBM 960Cessna CaravanPiaggio AvantiEpic E1000Quest Kodiak

Light jets

Short legs and a lot of them, so the belly, the aft fuselage behind the engines and the cabin need attention far more often than the top surfaces do. Most light-jet owners are better served by frequent small turns than by one big annual detail.

Cessna Citation M2Citation CJ2Citation CJ3Citation CJ4Embraer Phenom 100Phenom 300HondaJetLearjet 45Learjet 70Learjet 75Cirrus Vision Jet SF50Hawker 400XP

Midsize and super-midsize jets

A midsize exterior done properly is a two-person day, and anyone quoting four hours is quoting a wash. Brightwork and leading edges are what a passenger actually sees walking up to the aircraft, so that is where the time goes.

Citation XLSCitation LatitudeCitation LongitudeCitation SovereignBombardier Challenger 300Challenger 350Embraer Praetor 500Praetor 600Legacy 450Legacy 500Gulfstream G150Gulfstream G280Hawker 800XPHawker 900XP

Heavy and long-range jets

These are hangar jobs on a schedule, and usually overnight ones. The interior takes longer than the exterior: cabin woodwork, leather, stone and galley surfaces each want a different approach, and veneer is the thing most often ruined by someone using a general-purpose cleaner on it.

Gulfstream G450G550G600G650Bombardier Global 5000Global 6000Global 7500Dassault Falcon 900Falcon 2000Falcon 7XFalcon 8XChallenger 604Challenger 650Embraer LineageAirbus ACJBoeing BBJ

Helicopters

Blades, the mast area and the belly carry nearly all of it, and a Manhattan pad with no hangar means salt deposits never stop arriving. Blades are cleaned by hand and never with a machine, and we stay off anything bonded or taped unless your mechanic has told us it is fine.

Robinson R44Robinson R66Airbus H125H130H135H145Bell 206Bell 407Bell 429Bell 505Leonardo AW109AW139Sikorsky S-76MD 500

Floatplanes, vintage and warbirds

Salt water, doped fabric and polished bare aluminium are three different finishes needing three different product sets. We ask what the finish actually is before we touch it, because a modern automotive compound will destroy dope and fabric and there is no undoing that.

de Havilland Beaver on floatsde Havilland OtterCessna 180 amphibianCessna 206 amphibianPiper CubBoeing StearmanT-6 TexanWaco
The work itself

Nine steps, in this order, every time

Most of what follows is the order rather than the products, because the order is what stops a detail doing damage. An aircraft punishes improvisation in a way a car does not: there are things on an airframe that give a false reading if you put wax in them, and there are finishes that a normal automotive compound destroys permanently. So this is fixed.

  1. 01

    Walk the aircraft with you, or with your mechanic

    Before anything is opened or wetted we walk the airframe and agree what is paint, what is bare polished metal, what is doped fabric, what is vinyl or decal, and what is taped, bonded or placarded as off limits. Then we note what is already damaged, because nobody wants that conversation afterwards. If anything looks like it needs a mechanic rather than a detailer — a weeping seal, a lifted panel, corrosion past the surface — we stop and say so. We are not qualified to assess it and will not pretend otherwise.

  2. 02

    Mask and protect what water and product must not reach

    Static ports, pitot tubes, vents, drains, antennas, probes and any open inspection point get covered before the first panel is touched. This is the step that separates aircraft work from car work: a car has nothing on it that gives a false airspeed reading if you block it with wax. Covers come off at the end against the same list they went on by, counted out and counted back.

  3. 03

    Dry or low-moisture exterior wash, top down

    Two-bucket discipline is not enough on an airframe, so we work in sections with fresh media per panel and never drag a soiled towel across a second surface. Top down, because everything you loosen travels downwards. On most ramps this is a waterless or low-moisture process — partly because many fields forbid running water on the apron, and partly because water finds panel gaps, lap joints and fastener heads and then sits there.

  4. 04

    Belly, wheel wells and the aft fuselage, by hand

    The dirtiest third of the aircraft and the part a wash arc never properly reaches. Exhaust soot, hydraulic weep, brake dust, spent de-ice fluid and tyre rubber all live down here, and all of them are bonded rather than loose. This is slow, lying-on-a-creeper work, and it is the single biggest difference between a detail and a courtesy wipe.

  5. 05

    Decontaminate, then correct only what needs correcting

    A chemical decontamination lifts what washing cannot: oxidation, soot film, industrial fallout, bug protein baked into the leading edges. Only then can anyone judge what is a defect and what was just dirt. Correction is a last-resort step on an aircraft, not a default one, because paint on an airframe is thinner than most people assume and there is a finite amount of it. We measure where it matters and we would rather leave a mark in than cut through for it.

  6. 06

    Brightwork, separately and with its own products

    Polished bare aluminium is a different material with a different failure mode. It hazes, then oxidises, and it does so quickly once it has started. Polishing is the visible half; the sealing stage afterwards is the half that decides whether it still looks like that in two months. Automotive products do not belong anywhere near aircraft brightwork, whatever the bottle claims.

  7. 07

    Seal the paint

    A sealant or coating on an airframe is not about gloss, it is about making the next contamination event removable. Sealed paint lets soot, salt and de-ice residue come off with far less mechanical work, which means fewer correction passes over the aircraft’s life. That is the actual argument for it.

  8. 08

    Cabin: top down, dry first, then treat

    Dry extraction and vacuum before any liquid, because wetting dust turns it into a stain. Then leather, then hard surfaces, then glass last so nothing lands on it afterwards. Woodwork and veneer get a product chosen for veneer, which is the single thing most often ruined in a business-jet cabin by someone reaching for a general-purpose cleaner. Galley and lavatory are done as a separate pass with separate media, for reasons that should not need spelling out.

  9. 09

    Hand the aircraft back against the list it came in on

    Covers off and counted, nothing left in a wheel well, nothing left in a seat pocket, no towel anywhere on the aircraft. We tell you what we found, what we did, what we deliberately left alone and why. If something wants a mechanic’s eyes, that is in writing.

Short-notice and AOG turnarounds

Charter and fractional schedules do not leave room for a two-day appointment. We work the gaps: an overnight cabin reset between legs, a morning exterior before a midday departure, a turnaround at the FBO while the crew files.

Tell us the tail, the airport, the FBO and the time the aircraft has to be ready. We will tell you honestly whether it can be done in that window rather than start and leave you with a half-finished aircraft and a departure slot.

Request an aircraft quote →

Airports and heliports we cover

47 fields across New York City, Long Island, New Jersey, Westchester and the Hudson Valley — from Teterboro and Westchester County down to the grass strips on the North Fork. Each one is listed with its FAA, IATA and ICAO identifiers, because that is how your crew refers to it.

New York City & the Manhattan heliports

Corporate and charter aircraft at the airline-field FBOs, and the three Manhattan pads, where there is no hangar and the river never stops putting salt in the air.

JFK · KJFK John F. Kennedy International
Jamaica, Queens

Corporate and charter aircraft at the JFK FBOs and on the general-aviation ramp. We are not an airline fleet contractor and do not pretend to be one.

LGA · KLGA LaGuardia Airport
East Elmhurst, Queens

Business aircraft on the general-aviation side, including the Marine Air Terminal ramp. Slots are tight here, so the work gets planned around the departure.

JRB · KJRB Downtown Manhattan/Wall St. Heliport
Pier 6, Lower Manhattan

East River salt spray and harbour air every day, on a pad with no hangar. Blades and the belly take the worst of it.

6N5 · TSS East 34th Street Heliport
Murray Hill, Manhattan

A tight pad with short windows between lifts. Mostly cabin resets and a glass-and-blade wipe inside the turn.

JRA · KJRA West 30th Street Heliport
Chelsea, Manhattan

Hudson River pad running tour and charter traffic all day. Interiors here see more feet per hour than anything else we clean.

Long Island — Nassau, Suffolk & the East End

From Republic and MacArthur down to the grass strips on the forks. Salt from two coasts, a hard seasonal peak, and a lot of aircraft that live on a tie-down.

FRG · KFRG Republic Airport
Farmingdale, Suffolk

Long Island's main business-aviation field, with several FBOs and a large hangared population. Our highest-volume field east of the city.

ISP · KISP Long Island MacArthur Airport
Ronkonkoma, Islip

Airline and corporate traffic side by side. Exhaust soot down the aft fuselage is the recurring job here, and it is a polish question, not a wash question.

FOK · KFOK Francis S. Gabreski Airport
Westhampton Beach, Suffolk

Shares the field with the 106th Rescue Wing. Seasonal East End charter peak on top of year-round salt off Shinnecock Bay.

HTO · KJPX East Hampton Airport
East Hampton, Suffolk

The summer peak field. Access arrangements here have changed more than once, so we confirm the current rules with your operator before the visit rather than assume them.

MTP · KMTP Montauk Airport
Montauk, Suffolk

The last field before the Atlantic. Salt air is constant and unfiltered — an aircraft kept outside here needs sealing, not just washing.

HWV · WSH · KHWV Brookhaven Calabro Airport
Shirley, Suffolk

Close enough to the Great South Bay that salt reaches the ramp. General aviation and flight-school traffic, much of it tied down outside.

3C8 Calverton Executive Airpark
Calverton, Suffolk

The old Grumman plant: long runways and a big, quiet ramp. Room to work a large aircraft properly without a slot pressing on you.

23N Bayport Aerodrome
Bayport, Suffolk

A preserved grass field with an antique and vintage fleet. Fabric, dope and bare metal — a different job from a jet, with a different product set.

21N Mattituck Airport
Mattituck, Suffolk

North Fork grass strip between the vineyards and the Sound. Salt from the north, field grit from underneath.

1N2 Spadaro Airport
East Moriches, Suffolk

Grass strip on the South Shore. Bug strike on the leading edges through summer and mud up the gear legs after rain.

49N Lufker Airport
East Moriches, Suffolk

Small East Moriches strip, private and local traffic. Tie-down aircraft that get washed when someone comes to them.

87N Southampton Heliport
Southampton, Suffolk

Summer-weekend helicopter traffic turning fast. Cabin resets between lifts, and glass that has to be perfect because the passenger is sitting against it.

0B8 · FID Elizabeth Field
Fishers Island

Reachable by air or boat only — which is exactly why the aircraft based here lives in salt air with nowhere to hide from it.

7N3 Sands Point Seaplane Base
Port Washington, Nassau

A salt-water operation. Floats, struts, rigging and the underside of the wing are the whole job, and rinsing is not optional.

New Jersey

Teterboro and Morristown at one end, Pine Barrens and Highlands strips at the other. Industrial fallout in the north-east of the state is its own problem.

TEB · KTEB Teterboro Airport
Teterboro, Bergen

The busiest dedicated business-aviation airport in the United States, and our busiest field anywhere. Several FBOs share it, so tell us which one when you book.

MMU · KMMU Morristown Municipal Airport
Morristown, Morris

The main Teterboro alternative, with a large hangared corporate population. Overnight cabin work is straightforward here because the aircraft is already inside.

CDW · KCDW Essex County Airport
Caldwell, Essex

Busy general-aviation and training field — piston singles and light twins far more than jets, most of them tied down outside year-round.

EWR · KEWR Newark Liberty International
Newark, Essex

Corporate and charter aircraft at the FBO. Airline fleet work is a different business with different contracts, and it is not ours.

LDJ · KLDJ Linden Airport
Linden, Union

Ringed by refinery and port industry. Industrial fallout bonds to paint faster here than at any other field we work, and a wash alone will not lift it.

N07 Lincoln Park Airport
Lincoln Park, Morris

A short runway beside the Pompton, and a damp field. Corrosion watch in the gear bays and door shuts matters more here than appearance does.

N51 Solberg–Hunterdon Airport
Readington, Hunterdon

Grass and paved, general aviation and ballooning. Farm dust through summer, which is abrasive and should never be wiped dry.

SMQ · KSMQ Somerset Airport
Somerville, Somerset

General-aviation field with tree cover around the ramp. Sap and pollen do more damage to the paint here than flying hours do.

47N Central Jersey Regional Airport
Hillsborough, Somerset

Small Central Jersey field — training and private owners, open tie-downs, full sun on the top surfaces.

39N · PCT Princeton Airport
Princeton / Rocky Hill, Mercer

Flight training and private owners. A lot of SR22s and 172s that have never had anything but a hose run over them.

TTN · KTTN Trenton–Mercer Airport
Ewing, Mercer

Scheduled service and corporate aircraft side by side. Jet blast and tyre rubber across the ramp side of the airframe.

N87 Trenton–Robbinsville Airport
Robbinsville, Mercer

Small field, open ramp, nothing between the aircraft and the sun. UV on the top surfaces and crazing on the glareshield.

BLM · KBLM Monmouth Executive Airport
Belmar / Farmingdale, Monmouth

Long runway near the shore. Salt arrives on the wind even though the field sits inland of the beach, and people are usually surprised by how much.

FWN · KFWN Sussex Airport
Sussex, Sussex County

Northwest hills: tree sap, heavy pollen and a long winter of road and runway salt carried in on the gear.

4N1 Greenwood Lake Airport
West Milford, Passaic

A short Highlands field hemmed in by trees. Sap, shade and damp — the combination that grows mildew in a cabin over a wet month.

N12 Lakewood Airport
Lakewood, Ocean

Pine Barrens sand and pitch. Sand is the problem: it is sharp, and it scratches anything dragged across it.

MJX · KMJX Ocean County Airport
Toms River, Ocean

Barrier-island salt off Barnegat Bay, on a field where most of the fleet is tied down rather than hangared.

3N6 Old Bridge Airport
Old Bridge, Middlesex

Small Middlesex field with private owners and a short season of serious flying.

N85 Alexandria Airport
Pittstown, Hunterdon

Rural Hunterdon field, grass and farm dust, and a lot of aircraft that are their owner's project as much as their transport.

1N7 Blairstown Airport
Blairstown, Warren

Glider and general-aviation field in the Delaware Water Gap. Tow planes work hard and show it on the belly.

12N Aeroflex–Andover Airport
Andover, Sussex County

Lakeside field, damp air, short season. Cabins here want a dehumidify-and-treat more than they want a shampoo.

Westchester & the Hudson Valley

White Plains for the jets, then the valley fields — damp mornings, open ramps and owners who do their own pre-flight and notice everything.

HPN · KHPN Westchester County Airport
White Plains, Westchester

Heavy business-jet traffic under strict noise and curfew rules. The work gets scheduled around your slot here, not the other way round.

SWF · KSWF New York Stewart International
New Windsor, Orange

Commercial, cargo and Air National Guard on long runways with a lot of ramp. Space is the one thing this field is not short of.

POU · KPOU Hudson Valley Regional Airport
Poughkeepsie, Dutchess

The Dutchess County field. Corporate and private owners, and a river valley that holds damp air into the morning.

MGJ · KMGJ Orange County Airport
Montgomery, Orange

General-aviation field with an open ramp and river-valley weather that turns over quickly. Good field for a same-day exterior.

44N Sky Acres Airport
Millbrook, Dutchess

A hilltop strip with its own weather and a lot of private owners who fly for the sake of it. Expect wind-blown grit on the leading edges.

06N Randall Airport
Middletown, Orange

Small Orange County field, local traffic, open tie-downs.

N45 Kobelt Airport
Wallkill, Ulster

A quiet Ulster County strip. The aircraft here are outside, and it shows in the paint before it shows anywhere else.

Ramp access is arranged through your FBO or your operator — send the tail number, the field and the FBO and we handle it before the day. If your field is not on this list, ask: the list is where we work regularly, not a boundary. Fields with a digit in the identifier have no ICAO code, which is why only some rows carry a third one.

Why any of this matters

Four things owners are rarely told

None of this is a sales argument. It is the reasoning behind what we charge for and, more often, behind what we tell people not to bother with.

Corrosion

Salt, and why the field matters as much as the aircraft

Salt does not damage an aircraft by sitting on the paint. It damages it by getting into the places that stay damp: lap joints, fastener heads, door shuts, control surface hinges, wheel wells, the seam where a fairing meets a skin. Chloride plus moisture plus two dissimilar metals in contact is a galvanic cell, and the cell runs whether or not the outside of the aircraft looks clean.

This is why a field matters as much as an airframe. An aircraft on a tie-down at Montauk is in salt air every hour of its life; the same type hangared at Morristown is not. It is also why rinsing is not optional on a seaplane and why we care about the underside of a wing far more than the top of one. The top of the wing is what you see. The bottom is where the problem starts.

Nothing we do is a corrosion repair, and nothing we do is an inspection. What cleaning does is remove the electrolyte before it has time to work, and make what is underneath visible to the person whose job it is to assess it. Those are real and worth paying for. Neither is maintenance.

De-ice season

Spent de-icing fluid, and the winter nobody schedules for

Spent de-icing fluid is the most underrated problem on a winter airframe in this region. Type I comes off the aircraft in flight and goes somewhere — mostly the belly, the flap tracks and the empennage. Type IV is a thickened fluid designed to stay put, and it does: residue collects in exactly the aerodynamically quiet corners you would least like it to.

Left there across a season it holds moisture against the skin continuously, which is the actual reason to take it off. It also rehydrates, which is why a surface that looked dry in December can be tacky in February. Operators who schedule removal through the season rather than once in spring are not being fussy; they are avoiding a finding.

There is a cosmetic argument too — Type IV residue goes yellow and streaks — but the cosmetic argument is the less important one.

Bonded contamination

Exhaust soot is not dirt, and washing it harder makes it worse

The dark plume running aft from the engines or the exhaust stacks is not dirt and will not wash off. It is combustion product that has been heat-bonded onto the clear coat, and the harder it is washed the more it is burnished in. Every aircraft owner who has scrubbed at it has made it shinier and no lighter.

Removing it is a chemical decontamination followed by a controlled machine pass, which means paint thickness becomes the governing constraint rather than effort. On an aircraft that has had the same treatment applied by five different people over fifteen years, there is not always enough clear coat left to take a sixth pass, and the honest answer is sometimes to leave it. We will give you that answer rather than quietly cut through for the photograph.

Cabin interiors

Five materials within arm’s reach, each with a different tolerance

A business-jet cabin is four or five different materials within arm’s reach of each other, each with a different tolerance. Aniline and semi-aniline leather absorbs; pigmented leather does not. Wool carpet felts if it is over-wetted. Veneer is a fraction of a millimetre of real wood over a substrate, finished with a lacquer that solvents will haze and that cannot be refinished in place. Stone veneer in a galley is porous. Placards and decals lift at the edge if a cleaner creeps under them.

Which is why there is no such thing as an all-purpose interior cleaner in this work, and why the one thing we ask before a first cabin job is what has been used in there before. Most of the damage we are asked to fix in a cabin was done by a well-meaning person with a bottle of something aggressive and no idea that the trim was veneer.

Straight comparison

A line-service wipe and a detail are not the same purchase

Your FBO’s line crew do good work and they are not trying to do ours. The confusion costs people money in both directions — paying us for something the line crew would have done, or expecting a courtesy wipe to fix a season of soot. So here it is side by side.

Line service compared with a full aircraft detail
FBO line serviceA detail
Who does itYour FBO line crew, as a courtesyUs, booked as a job with a defined scope
Typical time on the aircraft10 to 20 minutes between other dutiesFour hours to two days, by type and scope
ExteriorWindscreen, leading edges, a wipe of what showsFull airframe, top down, section by section, with fresh media per panel
Belly and wheel wellsNot generally includedIncluded, by hand, and usually the longest single step
Bonded contaminationNot addressed — washing will not lift itChemical decontamination, then a correction pass only where it is justified
BrightworkA wipePolished and then sealed, with aviation-specific products
CabinTrash out, a vacuum, glassLeather, hard surfaces, veneer, carpet, galley and lavatory, each with its own media
ProtectionNoneSealant or coating, so the next contamination comes off easily
What you get afterwardsA clean-looking aircraft for the departureA written note of what was found, done, and deliberately left alone

Who books aircraft detailing

🛫

Owner-operators

Single aircraft, often hangared at Republic, Morristown or Essex County, flown most weekends. Usually a scheduled exterior and a cabin refresh on a rhythm.

💼

Charter and management

Aircraft that carry paying passengers, where cabin presentation is the product. Short-notice turnarounds and between-leg resets are most of this work.

🏢

Flight departments and FBOs

Fleets on a standing schedule at one field, quoted per aircraft per visit the same way our fleet detailing works on the ground.

The words, and what they mean here

Flight departments and line crews ask for this work in their own vocabulary. Here is ours, so there is no gap between what you ask for and what turns up.

AOG
Aircraft on ground. For us it means a short-notice turnaround: you need it clean before a departure that is already on the schedule.
Dry wash / waterless
A low-moisture exterior wash. It is the default on most ramps because it keeps water out of panel gaps, static ports and pitot tubes, and because many fields will not let you run water on the apron at all.
Brightwork
Polished bare aluminium — leading edges, spinners, nacelles, sometimes a whole fuselage. It oxidises fast once it starts, and the sealing stage after polishing is what decides how long it holds.
Belly and empennage
The underside and the tail. Where exhaust, hydraulic weep and spent de-ice fluid all collect, and the first place corrosion shows.
De-ice residue
What is left on the skin after Type I and Type IV fluid. It holds moisture against the aircraft all winter, which is the real reason to remove it rather than how it looks.
Soot track
The dark stain running aft from the engines or exhaust stacks. Bonded, not loose — it is a polishing job, and washing at it harder only burnishes it in.
Quick turn
Cabin reset between legs: trash, glass, galley, lavatory, leather wipe, vacuum, belts squared away. Measured in tens of minutes, not hours.
Line service vs. detailing
Your FBO line crew fuels, tows and does a courtesy wipe. We do the work that takes hours and leaves the aircraft measurably different.
Tail number
The N-number. Send it when you book: it is how your FBO finds the aircraft and how we confirm the type before we load the van.
Chalking
Paint gone flat and powdery from UV. Common on anything that lives on a tie-down, and correctable up to a point — past that point it is a paint shop, and we will say so.

Aircraft detailing pricing

Aircraft are quoted on type, condition and access rather than from a list — a piston single and a midsize jet are not the same job, and a hangar and an open ramp are not the same conditions.

What we need to quote: aircraft type, the airport and FBO, whether it will be hangared or on the ramp, what you want done, and when it has to be ready. We come back with a fixed figure, not an hourly rate that drifts.

Piston singles and light twins start around the level of our largest ground work. Turboprops, light jets and midsize aircraft are quoted individually. Standing schedules for a flight department or FBO price lower per visit than one-off work, the same way fleet does.

Prices for our road-vehicle services are listed in full on the pricing page; aircraft are deliberately not on that list, because a number there would be meaningless without the type.

Booking

Seven lines in a message and we can quote it

We would rather quote a fixed figure than an hourly rate that drifts, and to do that we need to know what we are walking up to. Send these and you will get a number, not a range. Leave them out and we have to ask anyway, which costs you a day.

If the aircraft is going out today, call instead — it is faster and we will tell you straight away whether it fits.

Call (808) 556-7589
Tail number
How your FBO finds the aircraft and how we confirm the type.
Type and variant
A CJ3 and a CJ3+ are not the same cabin. Variant matters.
Airport and FBO
The field decides access, the FBO decides the gate and the escort.
Hangar or ramp
Changes what is possible, what it costs and how long it takes.
Scope
Exterior, interior, brightwork, protection — or "it is being sold".
Deadline
The departure time, not a vague window. We plan backwards from it.
Finish history
Painted, polished, doped, wrapped. And what has been used on it before.

Aircraft detailing FAQ

No. We do cleaning and appearance work only. Under 14 CFR Part 43, maintenance on a certificated aircraft may only be performed by an A&P mechanic or a Part 145 repair station, and we are neither. If the aircraft needs a mechanic we will tell you so.
Short-notice turnaround cleaning. A cabin reset between legs, an exterior before a midday departure, or a bird strike or fuel spill that has to come off the paint before the next flight. Tell us when the aircraft has to be ready and we will say honestly whether it fits.
Dry or low-moisture wash by default, because that is what most ramps and hangars allow and it keeps water out of panel gaps and static ports. Where a wet wash is permitted and appropriate we carry our own water and containment.
47 airports and heliports across New York City, Long Island, New Jersey, Westchester and the Hudson Valley — from Teterboro, Republic and Morristown down to Montauk, Mattituck and the East End strips. The full list is on this page.
Through your FBO or operator. Give us the tail number, the airport and the FBO when you book, and we coordinate access, badging and any escort requirement before the visit rather than on the day.
Usually, and it is often the best option — controlled lighting, no weather and no pressure from a departure slot. Overnight cabin work is common for charter aircraft turning early the next morning.
Yes, and it gets its own process. Bare polished skin oxidises quickly once it starts, so the sealing stage after polishing is what decides how long the finish holds. We do not put automotive products on aircraft brightwork.
Yes, including the belly and empennage where spent fluid collects. Left in place that residue holds moisture against the skin all winter, which is the real reason to take it off rather than appearance.
On type, condition and access rather than from a list — a piston single and a midsize jet are not the same job. Send the type, airport, FBO, what you want done and the deadline, and we come back with a fixed figure.
Yes, on a standing schedule quoted per aircraft per visit, which prices lower than one-off work. It is the same arrangement as our ground fleet detailing, run at your field.
Yes — KTEB is our busiest field anywhere, aircraft or ground. Several FBOs share the airport, so tell us which one you are on and we coordinate access through them. Morristown (KMMU), Essex County (KCDW) and Westchester (KHPN) are the same arrangement.
Yes, including Robinson R44 and R66, Airbus H125 and H135, Bell 407 and 429 and Leonardo AW109. Blades are cleaned by hand, never with a machine, and we stay off anything bonded or taped unless your mechanic has told us it is fine. The Manhattan pads — KJRB, TSS and KJRA — are a regular run for us.
That is most of the heliport and light-jet work. A cabin reset is trash, glass, galley, lavatory, leather wipe, vacuum and belts squared away, measured in tens of minutes. Tell us the gap you have and we will say honestly whether it fits, rather than start and not finish.
Yes, and it is a common booking — the exterior is fine but the cabin has had a hard month. Interior-only is quoted on cabin size and condition. The reverse is just as common before a sale or a photo shoot.
Tell us what your FBO or operator requires and we will confirm in writing before the visit is booked, and send the certificate to whoever needs to be named on it. Fields differ a lot on this, and it is far better settled in advance than at the gate on the day.
Yes — Westchester County (KHPN), Stewart (KSWF), Hudson Valley Regional at Poughkeepsie (KPOU), Orange County at Montgomery (KMGJ) and the valley strips including Sky Acres and Randall. KHPN runs under strict noise and curfew rules, so work there is scheduled around your slot.
Yes, and it is the arrangement that actually protects the aircraft. Spent Type I and Type IV fluid on the belly and empennage holds moisture against the skin all winter. A scheduled removal through the season costs less than one corrosion finding.
Often, if the cars are at the hangar or the FBO lot. It is the efficient way to do it, and it is how most of our flight-department and owner work ends up running. Our ground services are listed on the pricing page.

Get a fixed quote — we reply in under an hour

Tell us about your vehicle and we'll send a firm price. No pressure, no estimate drift.

Got it — thanks!

We'll reply with your fixed quote within the hour during business hours. For immediate help, call (808) 556-7589.

Ready to detail the aircraft?

On your ramp or in your hangar. Quoted on type, condition and access.

Get an Aircraft Quote